SasquatchParts by Samco HD Silicone Intercooler Hose Kit for 2016-2022 Colorado/Canyon 2.8L Duramax [2-Piece]

$389.95

ETA: November 2024 (Black)


We offer two different intercooler hose kits: Choose either the 2-piece kit or the 5-piece kit. The 5-piece hose kit replaces all of the silicone hose connectors in the CAC system, including the turbocharger air inlet connector. The 2-piece kit, which is offered at a lower price, replaces just the primary hoses that connect to the intercooler which are the ones most likely to fail. (We don’t see the other smaller hoses fail.)

NOTE: We do not have an ETA on the 5-piece kit at this time. For the 2-piece kit, the ETA for Black hoses is November 2024. We do not have an ETA on colors other than black. Please add your email to the product waitlist to be notified when they’re back in stock. Thanks!

 

Factory Hoses Fail due to Oil Mist

The 2.8L Duramax engine found in the 2015+ Chevrolet Colorado and GMC Canyon has an oil mist problem. Significant amounts of oil vapors (which also include water, raw diesel fuel, abrasive particulate matter and other contaminates) make their way from the crankcase into the intercooler hoses where it accumulates. Over time, this sludge will rot out the factory hoses and eventually they will split open and fail catastrophically, leading to a potentially unsafe situation, significant repair costs and inconvenience.

Sasquatch Hoses by Samco utilize a high performance fluoroline coating on the inside of the hoses that prevent the hoses from deteriorating over time due to exposure to oil vapors.

 

Factory Quick Connect Clamps are Problematic

The factory hoses utilize a special type of quick connect clamp designed to decrease the time it takes for an auto worker to install the intercooler hoses on the assembly line. These connectors are known to leak and fail prematurely.  Eventually the rubber hose splits open and fails where it’s pressed into the quick connect clamp, causing the hose to fail, leading to a potentially unsafe situation, significant repair costs and inconvenience.

Sasquatch Hoses by Samco utilize a special intercooler adapter to eliminate these quick connect clamps once and for all. Our billet CNC aluminum intercooler adapters with Viton O-ring have been engineered and tested to hold more pressure than the factory quick connect seal. We also include brand new stainless steel retainer clips so that you don’t need to re-use the factory clips, which requires breaking your factory hoses.

 

Sasquatch Hoses are Heavy Duty, Engineered and Tested

The factory hoses are incredibly flimsy. Their design was optimized for low cost–not performance or durability. The factory hoses are known to leak and fail prematurely. Replacement parts will only fail again in the future, after enough time has passed for the hoses to deteriorate again.

Sasquatch Hoses by Samco are designed to outperform and outlast the factory hoses. Our hoses have been engineered, 3rd party lab tested and are rated to 90 psi. They are also real-world tested in Minnesota’s harsh winter (-20F) and summer (100+F) climate conditions. We take the extra time and spend the extra money to get things right: because it’s the right thing to do. After all, the bitterness of poor quality remains long after the sweetness of low price is forgotten.

 

Sasquatch Hoses are Manufactured in Europe

The factory hoses are labelled “Made in China”. They are very low quality and were designed to be as low-cost as possible. We’ve had numerous reports of split hoses over the years, and until now the only solution was to replace the part with the same poor quality factory component. On top of that, the factory hoses are only sold bundled along with sensors and the metal and plastic sections of the system. This means they cost a lot more than they should to replace and wastes parts that are perfectly functional.

Unlike so many companies these days, we choose the highest quality suppliers, components and materials available. And we do everything we can to utilize American-made components and materials, even down to our product packaging and boxes. Sasquatch Hoses are handmade for us by Samco in Britain, the world leader in performance silicone hoses. And we source our OE-quality silicone-specific hose clamps from Germany.

 

Product Details

Fitment: 2016-2022 Colorado/Canyon 2.8L Duramax

Kit Includes:

  • SasquatchParts intercooler hose adapters
  • SasquatchParts intercooler hose adapter retainer clips
  • SasquatchParts by Samco heavy duty silicone intercooler hose set, fluorolined, 2-piece
  • Norma stainless steel silicone hose clamps with rolled edges

This is a 2-hose kit to replace the primary intercooler inlet/outlet hoses which are prone to failure–and GM is often out of stock of the interior factory components. The silicone is manufactured by hand exclusively for us by Samco Sport in the UK, the world leader in performance silicone. They are fluorolined inside for oil resistance. New OE-quality silicone-specific hose clamps are included.

The kit eliminates the (2) quick connect clamps, which are a failure point just as they are on other vehicle models using similar clamps like Sprinter vans and many Volkswagen models. Our custom CNC aluminum intercooler adapters with Viton O-ring have been engineered to hold more pressure than the factory quick connect clamps. We include brand new stainless steel retainer clips so that you don’t need to re-use the factory clips, which requires physically destroying your factory hoses.

To ensure quality and performance, we had a 3rd party engineering firm conduct an independent design review and lab test of our hoses and adapters against the factory setup and you can read the full results at the bottom of the page. The factory hoses ballooned significantly even at low pressures. When pressure reached 50 psi, testing had to be halted due to excessive ballooning. The Sasquatch setup is rated for 90+ psi.

Available in Black

 

Product Photos

Sasquatch “Hot Side” Hose shown alongside factory component:

Clamps not pictured

 

Sasquatch “Hot Side” Hose shown alongside factory component:

Clamps not pictured

 

Sasquatch Hoses shown attached to intercooler:

Clamps not pictured

 

Factory “Hot Side” Hose, pressure test @ 50 psi:

 

Sasquatch “Hot Side” Hose, pressure test @ 90 psi:

 

Third Party Testing


GM Part Numbers: 84084529, 23380487

You may also like…

  • SasquatchParts Up-Sized Group 31 AGM Battery Strap for Colorado/Canyon 2.8L Duramax

    $249.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • SasquatchParts ProVent 200 IV Catch Can Kit for Colorado/Canyon 2.8L Duramax

    Original price was: $479.95.Current price is: $449.95.
    Add to cart
  • SasquatchParts OE GM Timing Belt Tool Kit for Colorado/Canyon 2.8L Duramax (RENT or BUY)

    From: $749.95
    Read more
  • Complete Timing Belt Kit for Colorado/Canyon 2.8L Duramax (LWN)

    Original price was: $596.32.Current price is: $339.95.
    Read more